Schlauchbootforum

Schlauchbootforum (https://schlauchboot-online.com/index.php)
-   2-Takt (https://schlauchboot-online.com/forumdisplay.php?f=14)
-   -   Drehmoment von 2 Takt Motoren (https://schlauchboot-online.com/showthread.php?t=8409)

Matt_CDN 27.02.2006 21:46

Drehmoment von 2 Takt Motoren
 
Hier gibts recht seltene drehmomentwerte von 2 taktern ... Vor einger zeit wurde das mal angesprochen...


Um Links zu sehen, bitte registrieren


"Not surprisingly given its strong on-water performance, the Mercury 250XS pulled the most horsepower (252 hp at 5200 rpm). Next was the Yamaha (246 hp at 5600 rpm). Evinrude brought up the rear (239 hp at 5600 rpm).

In terms of torque, the Yamaha 250 HPDI VMax edged Mercury with 268 lb.-ft. at 3800 rpm, vs. the Merc's 267 lb.-ft. at 4400 rpm.
Evinrude came in a distant third, with 250 lb.-ft. at 4000 rpm. "


Jetzt muss man nur noch drehmomentwerte von 4taktern mit gleich viel PS bekommen und man kann mal sehen obs stimmt dass 2tekter mehr drehmoment haben

Matt

P.S.

268 ftlb = 363 Nm
267 ftlb = 362 Nm
250 ftlb = 339 Nm


Alle Zeitangaben in WEZ +2. Es ist jetzt 21:58 Uhr.

Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 2005 - 2025 , http://schlauchboot-online.com