![]() |
Oh Mann
Du gibst wirklich alles. Meine Frau meint ja immer schon, warum ich immer alles so perfekt machen muß, das geht doch einfacher. Aber ich muß zugeben: An Dich komme ich bei weitem nicht ran! Weiterhin viel Erfolg!! Gruß Rüdiger |
Hi Mike,
ich glaube du faellst in ein riesen Loch, wenn das alles vorbei ist. Was machst du dann mit deiner Zeit? Ich denke der ganze Thread ist grosses Kino - Respekt! Gruss Franz |
Zitat:
Such ich mir halt was :stupid: Basteln Um Links zu sehen, bitte registrieren oder Trailern mal anders Um Links zu sehen, bitte registrieren oder ich schmeis mich von den Klippen :stupid: Um Links zu sehen, bitte registrieren fad wird mir nicht :chapeau: LGryße Mike aus Salzburg |
Hi!
Logbuch Tag xxx Sensor für Garmin 720s --> fertig :chapeau: https://lh4.googleusercontent.com/--...48-no/PicasaUp https://lh4.googleusercontent.com/-A...48-no/PicasaUp https://lh6.googleusercontent.com/-E...48-no/PicasaUp https://lh3.googleusercontent.com/-v...48-no/PicasaUp Habe bisher alle Löcher im Heck mit Epoxy befüllt und erst dann die ebenfalls in Epoxy getauchte Schraube eingedreht, doppelte Sicherheit. https://lh4.googleusercontent.com/-f...48-no/PicasaUp https://lh4.googleusercontent.com/-n...48-no/PicasaUp https://lh4.googleusercontent.com/-7...48-no/PicasaUp https://lh4.googleusercontent.com/-A...48-no/PicasaUp https://lh6.googleusercontent.com/-p...48-no/PicasaUp https://lh5.googleusercontent.com/-E...48-no/PicasaUp Vergleich Bennett Ausführung, meine Ringöse: https://lh4.googleusercontent.com/-2...48-no/PicasaUp https://lh5.googleusercontent.com/-Q...48-no/PicasaUp Fertigstellung Trimmklappen: https://lh3.googleusercontent.com/-5...48-no/PicasaUp https://lh5.googleusercontent.com/-w...48-no/PicasaUp Rostschutz, verwende ich schon seit Jahren: https://lh6.googleusercontent.com/-_...48-no/PicasaUp Trimmklappensteuerung --> fertig :chapeau: https://lh4.googleusercontent.com/-w...48-no/PicasaUp https://lh4.googleusercontent.com/-k...48-no/PicasaUp https://lh6.googleusercontent.com/-p...48-no/PicasaUp Voll cool, Zündung einschalten, Trimmklappen ausfahren, Zündung ausschalten, Trimmklappen fahren automatisch in Nullstellung. :cool: Jetzt gibt es drei Tage Pause, wegen Klausur. :confused- LGryße Mike aus Salzburg |
Hi!
Jetzt geht es weiter. Nach drei Klausur in der Südsteiermark, fehlte mir schon was. Post von der anderen Seite. https://lh4.googleusercontent.com/-2...48-no/PicasaUp https://lh4.googleusercontent.com/-c...48-no/PicasaUp Aus der Bucht für kleines Geld, Ölstangsanzeige https://lh5.googleusercontent.com/-f...48-no/PicasaUp Öltank wurde auf Garantie getauscht https://lh4.googleusercontent.com/-O...48-no/PicasaUp https://lh5.googleusercontent.com/-e...48-no/PicasaUp Also gleich mal ein Loch hinein machen https://lh6.googleusercontent.com/-Y...48-no/PicasaUp https://lh4.googleusercontent.com/-k...48-no/PicasaUp https://lh5.googleusercontent.com/-Y...48-no/PicasaUp https://lh4.googleusercontent.com/-e...48-no/PicasaUp Bilgepumpe Abwasser Anschluss https://lh6.googleusercontent.com/-E...48-no/PicasaUp https://lh6.googleusercontent.com/-Z...48-no/PicasaUp https://lh3.googleusercontent.com/-j...48-no/PicasaUp Kabel https://lh5.googleusercontent.com/-5...48-no/PicasaUp https://lh5.googleusercontent.com/-E...48-no/PicasaUp https://lh5.googleusercontent.com/-S...48-no/PicasaUp https://lh5.googleusercontent.com/-A...48-no/PicasaUp https://lh6.googleusercontent.com/--...48-no/PicasaUp Zugentlastung des Brauseschlauch https://lh4.googleusercontent.com/-j...48-no/PicasaUp https://lh5.googleusercontent.com/-c...48-no/PicasaUp Bilgepumpe und Wasserpumpe --> fertig https://lh4.googleusercontent.com/-o...48-no/PicasaUp https://lh5.googleusercontent.com/-q...48-no/PicasaUp Anschluss Rückschlagventil https://lh3.googleusercontent.com/-d...48-no/PicasaUp https://lh6.googleusercontent.com/-yRT0spOc7zs/U26Ah6iUl7I/AAAAAAAAaIM/Nz5Z56O5J3g/w734-h548-no/PicasaUp[/IMG] https://lh5.googleusercontent.com/-i...48-no/PicasaUp https://lh5.googleusercontent.com/-2...48-no/PicasaUp Salat https://lh5.googleusercontent.com/-M...48-no/PicasaUp NMEA 2000 Kabelei https://lh5.googleusercontent.com/-V...48-no/PicasaUp https://lh3.googleusercontent.com/-V...48-no/PicasaUp Salat https://lh5.googleusercontent.com/-K...48-no/PicasaUp https://lh4.googleusercontent.com/-K...48-no/PicasaUp https://lh6.googleusercontent.com/-D...48-no/PicasaUp Kabel für Geräteträger https://lh4.googleusercontent.com/-H...48-no/PicasaUp LGryße Mike aus Salzburg |
Hi!
Manchmal muss man etwas tricksen um ein Kabel in den Panzerschlauch zu bekommen. Kabel einziehen --> fertig :chapeau: https://lh6.googleusercontent.com/-A...48-no/PicasaUp Anschluss Tankgeber: https://lh6.googleusercontent.com/-i...48-no/PicasaUp https://lh5.googleusercontent.com/-s...48-no/PicasaUp Masseanschluss für den Tank: https://lh6.googleusercontent.com/-x...48-no/PicasaUp Kennzeichnung aller Kabel: https://lh4.googleusercontent.com/-G...48-no/PicasaUp https://lh3.googleusercontent.com/-S...48-no/PicasaUp https://lh3.googleusercontent.com/-5...48-no/PicasaUp Kontrolle Masse am Tank: https://lh6.googleusercontent.com/-C...48-no/PicasaUp Tankgeber --> fertig :chapeau: https://lh5.googleusercontent.com/-c...48-no/PicasaUp Anschluss Öltank: https://lh4.googleusercontent.com/-S...48-no/PicasaUp https://lh3.googleusercontent.com/-T...48-no/PicasaUp https://lh5.googleusercontent.com/-J...48-no/PicasaUp https://lh4.googleusercontent.com/-W...48-no/PicasaUp https://lh5.googleusercontent.com/-M...48-no/PicasaUp https://lh3.googleusercontent.com/-c...48-no/PicasaUp Anschluss motorseitig https://lh5.googleusercontent.com/-D...48-no/PicasaUp https://lh5.googleusercontent.com/-s...48-no/PicasaUp Neuer Öltankgeber spinnt auch: https://lh5.googleusercontent.com/-C...48-no/PicasaUp https://lh3.googleusercontent.com/-3...48-no/PicasaUp Elektronik eleminiert, geht auch ohne, warum auch immer. Öltank --> fertig :chapeau: https://lh5.googleusercontent.com/--...48-no/PicasaUp Anschluss Motor --> fertig :chapeau: https://lh3.googleusercontent.com/-G...48-no/PicasaUp LGryße Mike aus Salzburg |
Hi!
Betriebsmittel befüllen: https://lh5.googleusercontent.com/-k...48-no/PicasaUp https://lh3.googleusercontent.com/-N...48-no/PicasaUp Die erste Tankrechnung: https://lh3.googleusercontent.com/-h...48-no/PicasaUp Erste händische Mischung lt. Empfehlung vom Händler: https://lh4.googleusercontent.com/-c...48-no/PicasaUp https://lh3.googleusercontent.com/-8...48-no/PicasaUp Der Filter war noch alt, wollte ihn weiter verwenden, eigentlich vertrottelt, alles zu tauschen und dann einen unbekannten Filter im Motor zu lassen. https://lh3.googleusercontent.com/-o...48-no/PicasaUp https://lh6.googleusercontent.com/-r...48-no/PicasaUp Tank eingebaut: https://lh3.googleusercontent.com/-N...48-no/PicasaUp Doch den Öltank noch einmal optimiert: https://lh5.googleusercontent.com/-3...48-no/PicasaUp https://lh5.googleusercontent.com/-A...48-no/PicasaUp https://lh4.googleusercontent.com/-N...48-no/PicasaUp Kabelei finalisiert: https://lh4.googleusercontent.com/-Z...48-no/PicasaUp https://lh4.googleusercontent.com/-C...48-no/PicasaUp Erste Sauerei: https://lh3.googleusercontent.com/-b...48-no/PicasaUp Erste Befüllung: https://lh5.googleusercontent.com/-b...48-no/PicasaUp Öltank --> fertig :chapeau: https://lh6.googleusercontent.com/-O...48-no/PicasaUp NMEA 2000 --> fertig :chapeau: https://lh4.googleusercontent.com/-M...48-no/PicasaUp Erste Ölfüllung: https://lh6.googleusercontent.com/-_...48-no/PicasaUp Ölleitung entlüftet: https://lh4.googleusercontent.com/-C...48-no/PicasaUp Anschluss Ölleitung: https://lh3.googleusercontent.com/-u...48-no/PicasaUp Motor gestartet, läuft --> fertig :chapeau::chapeau::chapeau::chapeau: Kabelei für den Geräteträger: https://lh5.googleusercontent.com/-z...48-no/PicasaUp Gummi, riecht lecker: https://lh5.googleusercontent.com/-r...48-no/PicasaUp https://lh3.googleusercontent.com/-U...48-no/PicasaUp https://lh3.googleusercontent.com/-S...48-no/PicasaUp Geräteträgerplatte steuerbord --> fertig :chapeau: https://lh5.googleusercontent.com/-6...48-no/PicasaUp https://lh4.googleusercontent.com/-t...48-no/PicasaUp LGryße Mike aus Salzburg |
Na das sind ja mal erste Erfolgsmeldungen!
Du bekommst nach und nach was fertig, statt immer wieder was Zusätzliches anzufangen (anfangen müssen:cognemur:). Halte durch, ich denke Du kannst zumindest die Zielgerade schon sehen :cool:. Rüdiger |
Hi!
Heute mal keine Schrauberfotos, muss ja auch meine Kohle verdienen, ein paar Besprechungen .... in Wien. Bei der Hinfahrt nun der Anruf von der LAREG, Dienstag 20.05.14 10:00 bei der Slipstelle, ich glaube ich muss die Schlagzahl erhöhen um fertig zu werden. https://lh5.googleusercontent.com/-S...05.14_Wien.JPG LGryße Mike aus Salzburg |
Hi!
Zielgerade Kabelei gefällt nicht :cognemur: https://lh6.googleusercontent.com/-A...48-no/PicasaUp https://lh6.googleusercontent.com/-F...48-no/PicasaUp Steuerbord --> fertig :chapeau: https://lh4.googleusercontent.com/-f...48-no/PicasaUp Zwischenzeitlich mit einem Interessenten mein zum Verkauf stehende Segelboot angeschaut, was für ein Zeitaufwand, über 3 Stunden verbraten. Backbord https://lh6.googleusercontent.com/-i...48-no/PicasaUp https://lh3.googleusercontent.com/-H...48-no/PicasaUp https://lh4.googleusercontent.com/-S...48-no/PicasaUp https://lh4.googleusercontent.com/-2...48-no/PicasaUp https://lh4.googleusercontent.com/-l...48-no/PicasaUp Backbord --> fertig :chapeau: https://lh5.googleusercontent.com/-O...48-no/PicasaUp Steuerkabel --> fertig :chapeau: https://lh4.googleusercontent.com/-q...48-no/PicasaUp Wieder ein Gammelteil :cognemur: https://lh3.googleusercontent.com/-7...48-no/PicasaUp https://lh4.googleusercontent.com/-C...48-no/PicasaUp LGryße Mike aus Salzburg |
Mike:
anser-ansage: wenn das segelboot genau so auschaut wie den renoviertes SB kann man es ungesehen kaufen :chapeau: frage: welches werkzeug hast du nicht in deinem stall und was kannst nicht?:confused- |
Zitat:
Habe gerade --> zöllige Gabel/Ringschlüssel bestellt, Nussensatz zöllig in klein hatte ich schon. :stupid: Wenn Mann ein Leben lang schraubt und Werkzeug kauft, kommt schon was zusammen. LGryße Mike aus Salzburg P.S. Segelboot ist Top überholt, verkaufen konnte ich es trotzdem nicht heute nächster Termin. |
ein wirklich schönes Fotodokument hast du da erstellt :chapeau:
|
Liste der Anhänge anzeigen (Anzahl: 6)
DANKE für den tollen Beitrag!!!!
Bau auch grad ein Boot um und ändere vieles, und es ist wunderbar gute Ideen und Lösungen zu sehn. Was ich mir beim betrachten deiner tollen Umbauten aber immer gedacht habe, uuiiii das Gewicht das Gewicht. Beim Inspektionsdeckel hab ich auch rumgesucht, weil ich den verbauen will und falls wer einen einbaut, auch das ist einer Möglichkeit, ein durchsichtiger da muss ich nicht aufmachen wenn ich sehen will, ob Wasser reinläuft oder Benzin. Siehe das erste Foto ... Und jetzt zu den schönen Dingen:chapeau: siehe Fotos Sicher immer Geschmacksache, aber der Aha-Effekt am Hafen ist immer gross, einige Sachen werde ich auch verbauen, wäre das was für dein Boot? Leicht für dich zu verbauen, und der Effekt gross:grosscool |
Alle Zeitangaben in WEZ +2. Es ist jetzt 03:45 Uhr. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 2005 - 2025 , http://schlauchboot-online.com